Battle Jacket Guide For Baby Punks

battle jacket guide for baby punks

battle jackets or vests are really big in the punk scene. they also look cool as fuck. one of my favorite things about them is that each person's is different and represents their own style and interests. there are a few different steps u can follow to make one

step one. acquire the jacket

when making a battle jacket it's best to get one without any stretch to the denim bc the elastic threads in stretchy denkm break down faster than regular denim and when you're sewing things on it you might get a weird puckering effect. thrift stores like goodwill or salvation army are good places to look if you have time, but in my experience they don't have a lot of jean jackets. you can probably find one at walmart in the mens section, or target. if you'd like something with a more modern edge or higher quality denim you can check outlet stores like ross and marshalls. that's where i found mine for around 20 dollars. of course if you have the money you can get a Levi's trucker jacket or somewhere else more expensive. the color of the jacket is up to you. now that you have a base layer you can move on to customization

step two. washing the jacket

one important thing to remember about battle jackets is that they're handwash/no wash so it's best to wash your jacket before you begin. you have no idea who has worn or touched it before now. just throw it in the washing machine on cold and go blast laura jane grace for a little bit. personally i run mine through the dryer but if you'd prefer to air dry make sure you lay it flat because if not it will get stretched out shoulders.

step three. dyeing or painting

this is the part where you can possibly dye or paint your jacket. i have never dyed my jacket, but you can find fabric dye at Walmart and just follow the instructions on the bottle. i decided to spray paint mine because i had some cheap black spray paint and i wanted to know what would happen. if you're going to spray paint your jacket, make sure you do it outside and let it dry thoroughly before bringing it in. i left mine for about 18 hours so that the smell was completely gone. after that you want to turn it inside out and run it through the dryer with a couple bath towels for about 30 minutes to heat set it. spray painting your jacket will make it a bit more stiff. walmart and some craft stores sell spray paint that is made for fabric, but i didn't feel like paying for those so i used what i had on hand. i know those are pretty expensive and the bottles don't have a lot in them. if you only plan to handwash your jacket or don't plan to wash it at all, regular spray paint should work fine for you.

step four. back patch

most battle jackets that i have seen have a larger central patch in the back, with smaller ones on the front and around it. it's not essential to have a back patch but i think it helps to tie the whole jacket together. you can either make a back patch yourself or buy one. the site angryyoungandpoor.com has some back patches for popular bands. some bands also have back patches on their merch stores, or you can make one yourself. i made mine out of an old against me t-shirt. i measured around the design, cut it out, and then sewed it on the back of my jacket. if you want to make your own back patch you can do so in one of several ways that i will cover in just a second

step five. embroidering patches

there are a lot of patches out there that you can buy, but most of the time it's cheaper just to make them yourself. embroidery thread is pretty cheap at walmart, and all you need is sturdy scrap fabric to make something really cool. when you're embroidery a patch it's a good idea to get an embroidery hoop to keep your fabric taut. if you don't like the color of your scrap denim you can layer a different fabric over it. i had some stretchy cotton left over from cropping a t shirt that i layered over denim to help keep it in shape. this also makes it easier when you're sewing your patch onto your jacket. i don't recommend embroidering directly onto your jacket because it's harder to manage and if you decide you don't like how it looks and you rip it out you're left with weird holes that don't look good. it's all up to you but i wouldn't recommend it.

step six. painting patches

if you'd rather just paint your patches, you can always use fabric paint or fabric pens. it's best to avoid using acrylic paint because it wears off and cracks, but i have heard you can prevent that by mixing fabric medium into it. i have painted a few patches with acrylic paint but i used a layer of mod podge over the top to protect it. acrylic painted patches CANNOT go through the washing machine.

if you'd like to copy a particular logo or image with paint and you're not good with freehand you can make a stencil for it. the way i make stencils is by printing out my design and then covering the paper front and back with masking tape. once I've done that, i use an exacto knife to cut out the lines of my design and then i'm ready to go. you can use spray paint with a stencil or you can sponge fabric paint onto the design. if you choose to use spray paint make sure you have fabric paint in that color so you can fix up any problems with the design when you're done.

step seven. attaching your patches.

sewing is one of the most tedious parts of making a battle jacket. if you don't know how to sew you can google it. a lot of people use white embroidery floss or dental floss and whip stitch around their patch. if you're attaching an iron on patch that you bought, you should stitch around it too to secure it. make sure you're using a thimble if you're going over seams of the jacket, or sewing on an iron-on patch. at first it might seem fine, if a little time consuming, but days of finger pain isn't worth it. i prefer to pin my patches before sewing them, but you do you. for larger patches i first attach it with a thread that matches the fabric before using a contrasting whip stitch. that just makes things easier for me but it's not mandatory.

step eight. adding metal

spikes, studs and safety pins are a staple of punk clothing. safety pins are easy because you can get them anywhere and just put them anywhere. i got a bunch of varying sizes from walmart and i put them on everything. just play around and see what you like. you can find studs at your local craft store, probably in the leather working section. you just have to poke two holes in the fabric, push the prongs on your stud through, and then bend them back to secure it. you can also get studs online if you need to. i bought a couple packs of screw back spikes a little while ago, and i have since been adding those to a lot of my clothing. spikes are simple to add too. you poke a hole in the fabric, push the screw through, and then screw on the spike. some people recommend adding a dot of super glue in between the spike and screw to secure it, but personally I haven't needed to do that.

another way to add metal to your jacket is with chains. you can sew them on all the day down, or leave them hanging. it just depends on what you want to do. you can get short chains from walmart, or big rolls of chain from craft stores.

step nine. finish up

that's honestly about it. any of the information here can be applied to vests too. if your jacket is really crusty and you don't want it on your skin you can always wear a hoodie underneath, especially when it's cold. battle jackets can be worn with basically anything. mine has always been my go-to jacket for any occasion. make sure it actually represents your political beliefs and bands you listen to. get ready for people to look at you weird in the grocery store. if anyone has anything to add feel free to reblog, and if you have questions my ask box is open. you can always submit a photo of your jacket to my blog because i love seeing other people's diy stuff. wear a mask, stay safe, and fuck the pigs <3